This email address is being protected from spambots. You need JavaScript enabled to view it.

EV210BDanfoss EV210B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV210B is a real robust valve program with high performance and can be used in all kind of tough working conditions.
Connections from 1/8" up to 1", NC and NO versions, medium temperatures up to 140 °C (low pressure steam), coil enclosures up to IP67 ensure an optimal performance even under critical working conditions.

 

 

 
Increased performance without increasing the coil power
Most of the EV210B range is designed with a so-called impact system. The valve plate is not fixed, but has a small clearance. When the coil is energized the armature starts its movement, but is still not in contact with the pressurized valve plate. The armature will accumulate energy during the movement of the clearance, and when it hits the valve plate, the impact will lift the plate. This makes it possible to increase the performance of the EV210B up to 100 % without increasing the coil power, and without reducing the lifetime of the valve.
Wide coil range up to IP67:
The EV210B range uses the standard B-range of coils going from IPOO to IP65 this makes it possible to choose the optimal coils no matter if the solution is technical or economical. If the valve is placed in a dry, protected position with a limited temperature a low wattage coil with IP20 will be the most cost effective solution, but if the coil is placed in a position with risk of water splashing and temperatures up to 80oC, the more powerful and robust Clip-on coils will be best.
Modular design to meet specific requirements
The unique design of the armature in EV210B makes it possible to use other sealing materials than those commonly used. It is possible to use PTFE or other stiff materials due to the swaged-in design, used to make the connection between valve plate and armature. PTFE is optimal for extra long lifetime at high pressure and temperature.
Long lifetime
The valve plate will often determine the lifetime of an EV210B, especially when used in the extreme conditions with high temperature and high pressure. Another and more typical parameter is internal wear (abrasion). The EV210B has a high wall thickness, a unique square shape of the armature and a specially designed spring ensuring longer life. The windings of the moving end of spring are very close, this reduces wear significantly.
Insensitive to dirt
Owing to the unique square design of the armature, the risk of sticking armature caused by particles is low. Particles placed between armature and armature tube or armature top will be displaced by the fluid when the armature moves.
Increased resistance against corrosion and cavitation
The Stainless Steel version of EV210B is made of acid proof AISI316 SS and what is usually a copper ring avoiding hum in the armature top is made of silver. Even though the armature, because of the demand for good magnetic properties is made of less resistant material than the valve body, the body is very often the most sensitive part of the valve. It is the orifice that is subjected to risk of cavitation, sticking particles and erosion coming from the flow.
Optimum Kv-values for many connections
The Kv-value states the capacity of the valve. The valve size is very often denoted as the diameter of the orifice, but it is a fact that in most situations the lift of the packing plate determines the real restriction in the valve. Also the smoothed shape of the orifice in an EV210B increases the capacity and reduces the risk of cavitation. The EV210B range is designed with optimum shape and lift of the valve plate. When comparing the EV210B diameters with similar valves, this range has higher capacities.
Secure opening and closing
The EV210B is available with isolating diaphragm as accessory. This can be necessary if the medium is very dirty or corrosive, but also if the valve only is used very seldom. It often the case that corroded debris from other parts of a system end up in the solenoid valve, and make the armature stick within the armature tube. This can be avoided by using the isolating diaphragm module; this can be mounted on EV210B up to size 4,5mm.

• 2/2-way
• High Performance series
• Direct-operated
• DN 1.5 - DN 25
• Brass or stainless steel valve body
• NC (normally closed) and NO (normally open) versions
• ISO 228/1 G 1/8" to G 1"
• UL listed version with NPT. for North America (EVI)

 

Danfoss EV210B Direct-operated 2/2-way solenoid valves complete with coils

The Danfoss solenoid valve program includes valves suitable for most open and closed systems. The program comes complete with the clip-on coil and IP65 electrical plug and has been carefully designed to simplify product selection.
Appendix “02” for 24 V dc, “16”/”82” for 24 V ac and “31” / “84” for 230 V ac
Danfoss EV210B complete valves

To select the right valve all that is required to be known is:
• Open or closed pipe work system
• Pipe size
• Electrical voltage


 

EV210B, Direct-operated 2_2-way solenoid valves
Code no. Type Operation Function Connection Orifice size [mm] Seal mat. Diff. pressure [bar] Body mat. Kv value [m³/h] Coil
032U1200 EV210B Direct-operated N C G 1/8 1,50 mm NBR 0 - 30 bar Brass 0,080 m3/h -
032U1203 EV210B Direct-operated N O G 1/8 1,50 mm NBR 0 - 30 bar Brass 0,080 m3/h -
032U1205 EV210B Direct-operated N C G 1/4 1,50 mm NBR 0 - 30 bar Brass 0,080 m3/h -
032U1210 EV210B Direct-operated N C G 1/8 2,00 mm NBR 0 - 20 bar Brass 0,150 m3/h -
032U1219 EV210B Direct-operated N C G 1/4 3,00 mm PTFE 0 - 10 bar Brass 0,300 m3/h -
032U1220 EV210B Direct-operated N C G 1/4 3,00 mm NBR 0 - 10 bar Brass 0,300 m3/h -
032U1225 EV210B Direct-operated N C G 3/8 3,00 mm NBR 0 - 10 bar Brass 0,300 m3/h -
032U1228 EV210B Direct-operated N O G 1/4 3,00 mm NBR 0 - 5 bar Brass 0,300 m3/h -
032U1229 EV210B Direct-operated N O G 1/4 3,00 mm PTFE 0 - 10 bar Brass 0,300 m3/h -
032U1230 EV210B Direct-operated N C G 1/2 10,00 mm FKM 0 - 0,7 bar Brass 1,500 m3/h -
032U1231 EV210B Direct-operated N C G 3/8 6,00 mm NBR 0 - 1,2 bar Brass 0,700 m3/h -
032U145802 EV210B Direct-operated N C G 1/8 1,50 mm FKM 0 - 30 bar Brass 0,080 m3/h BB 24,00 V d.c.
032U145816 EV210B Direct-operated N C G 1/8 1,50 mm FKM 0 - 30 bar Brass 0,080 m3/h BB 24 V a.c. 50 Hz
032U145831 EV210B Direct-operated N C G 1/8 1,50 mm FKM 0 - 30 bar Brass 0,080 m3/h BB 230 V a.c. 50 Hz
032U147002 EV210B Direct-operated N C G 1/4 3,00 mm FKM 0 - 20 bar Brass 0,300 m3/h BB 24,00 V d.c.
032U147016 EV210B Direct-operated N C G 1/4 3,00 mm FKM 0 - 20 bar Brass 0,300 m3/h BB 24 V a.c. 50 Hz
032U147031 EV210B Direct-operated N C G 1/4 3,00 mm FKM 0 - 20 bar Brass 0,300 m3/h BB 230 V a.c. 50 Hz
032U148002 EV210B Direct-operated N C G 3/8 4,50 mm FKM 0 - 10 bar Brass 0,550 m3/h BB 24,00 V d.c.
032U148016 EV210B Direct-operated N C G 3/8 4,50 mm FKM 0 - 10 bar Brass 0,550 m3/h BB 24 V a.c. 50 Hz
032U148031 EV210B Direct-operated N C G 3/8 4,50 mm FKM 0 - 10 bar Brass 0,550 m3/h BB 230 V a.c. 50 Hz
032U3600 EV210B Direct-operated N C G 1/4 4,50 mm EPDM 0 - 13 bar Brass 0,550 m3/h -
032U3601 EV210B Direct-operated N C G 1/4 4,50 mm FKM 0 - 13 bar Brass 0,550 m3/h -
032U3602 EV210B Direct-operated N C G 1/4 6,00 mm EPDM 0 - 4,5 bar Brass 0,700 m3/h -
032U3603 EV210B Direct-operated N C G 1/4 6,00 mm FKM 0 - 4,5 bar Brass 0,700 m3/h -
032U3605 EV210B Direct-operated N C G 3/8 4,50 mm EPDM 0 - 13 bar Brass 0,550 m3/h -
032U3606 EV210B Direct-operated N C G 3/8 4,50 mm FKM 0 - 13 bar Brass 0,550 m3/h -
032U3607 EV210B Direct-operated N C G 3/8 6,00 mm EPDM 0 - 6 bar Brass 0,700 m3/h -
032U3608 EV210B Direct-operated N C G 3/8 6,00 mm FKM 0 - 6 bar Brass 0,700 m3/h -
032U3609 EV210B Direct-operated N C G 3/8 8,00 mm EPDM 0 - 2,5 bar Brass 1,000 m3/h -
032U3610 EV210B Direct-operated N C G 3/8 8,00 mm FKM 0 - 2,5 bar Brass 1,000 m3/h -
032U3611 EV210B Direct-operated N C G 3/8 10,00 mm EPDM 0 - 1,6 bar Brass 1,500 m3/h -
032U3612 EV210B Direct-operated N C G 3/8 10,00 mm FKM 0 - 0,45 bar Brass 1,500 m3/h -
032U3613 EV210B Direct-operated N C G 3/8 15,00 mm EPDM 0 - 0,45 bar DZR brass 2,500 m3/h -
032U3614 EV210B Direct-operated N C G 3/8 15,00 mm FKM 0 - 0,45 bar DZR brass 2,500 m3/h -
032U3615 EV210B Direct-operated N C G 1/2 8,00 mm EPDM 0 - 3 bar Brass 1,000 m3/h -
032U3616 EV210B Direct-operated N C G 1/2 8,00 mm FKM 0 - 3 bar Brass 1,000 m3/h -
032U3617 EV210B Direct-operated N C G 1/2 10,00 mm EPDM 0 - 1,6 bar Brass 1,500 m3/h -
032U3618 EV210B Direct-operated N C G 1/2 10,00 mm FKM 0 - 1,6 bar Brass 1,500 m3/h -
032U3619 EV210B Direct-operated N C G 1/2 15,00 mm EPDM 0 - 0,45 bar DZR brass 2,850 m3/h -
032U3620 EV210B Direct-operated N C G 1/2 15,00 mm FKM 0 - 0,45 bar DZR brass 2,850 m3/h -
032U3621 EV210B Direct-operated N C G 3/4 20,00 mm EPDM 0 - 0,4 bar DZR brass 4,500 m3/h -
032U3622 EV210B Direct-operated N C G 3/4 20,00 mm FKM 0 - 0,4 bar DZR brass 4,500 m3/h -
032U3623 EV210B Direct-operated N C G 1 25,00 mm EPDM 0 - 0,35 bar DZR brass 8,000 m3/h -
032U3624 EV210B Direct-operated N C G 1 25,00 mm FKM 0 - 0,35 bar DZR brass 8,000 m3/h -
032U3629 EV210B Direct-operated N C G 1/4 1,50 mm FKM 0 - 30 bar Brass 0,080 m3/h -
032U3630 EV210B Direct-operated N O G 1/8 1,50 mm EPDM 0 - 30 bar Brass 0,080 m3/h -
032U3631 EV210B Direct-operated N O G 1/8 1,50 mm FKM 0 - 30 bar Brass 0,080 m3/h -
032U3632 EV210B Direct-operated N O G 1/8 2,00 mm EPDM 0 - 12 bar Brass 0,150 m3/h -
032U3633 EV210B Direct-operated N O G 1/8 2,00 mm FKM 0 - 12 bar Brass 0,150 m3/h -
032U3634 EV210B Direct-operated N O G 1/8 3,00 mm EPDM 0 - 5 bar Brass 0,300 m3/h -
032U3635 EV210B Direct-operated N O G 1/8 3,00 mm FKM 0 - 5 bar Brass 0,300 m3/h -
032U3636 EV210B Direct-operated N O G 1/4 2,00 mm EPDM 0 - 12 bar Brass 0,150 m3/h -
032U3637 EV210B Direct-operated N O G 1/4 2,00 mm FKM 0 - 12 bar Brass 0,150 m3/h -
032U3638 EV210B Direct-operated N O G 1/4 3,00 mm EPDM 0 - 5 bar Brass 0,300 m3/h -
032U3639 EV210B Direct-operated N O G 1/4 3,00 mm FKM 0 - 5 bar Brass 0,300 m3/h -
032U3640 EV210B Direct-operated N O G 1/4 4,50 mm EPDM 0 - 2 bar Brass 0,550 m3/h -
032U3641 EV210B Direct-operated N O G 1/4 4,50 mm FKM 0 - 2 bar Brass 0,550 m3/h -
032U3642 EV210B Direct-operated N C G 3/8 3,00 mm EPDM 0 - 30 bar Brass 0,300 m3/h -
032U3643 EV210B Direct-operated N C G 3/8 3,00 mm FKM 0 - 30 bar Brass 0,300 m3/h -
032U3647 EV210B Direct-operated N C G 1/8 2,00 mm EPDM 0 - 30 bar Stainless steel 0,150 m3/h -
032U3649 EV210B Direct-operated N C G 1/8 3,00 mm EPDM 0 - 30 bar Stainless steel 0,300 m3/h -
032U3651 EV210B Direct-operated N C G 1/4 2,00 mm EPDM 0 - 30 bar Stainless steel 0,150 m3/h -
032U3653 EV210B Direct-operated N C G 1/4 3,00 mm EPDM 0 - 30 bar Stainless steel 0,300 m3/h -
032U3654 EV210B Direct-operated N C G 1/4 3,00 mm FKM 0 - 30 bar Stainless steel 0,300 m3/h -
032U3655 EV210B Direct-operated N C G 1/4 4,50 mm EPDM 0 - 13 bar Stainless steel 0,550 m3/h -
032U3656 EV210B Direct-operated N C G 1/4 4,50 mm FKM 0 - 13 bar Stainless steel 0,550 m3/h -
032U5701 EV210B Direct-operated N C G 1/8 1,50 mm EPDM 0 - 30 bar Brass 0,080 m3/h -
032U5702 EV210B Direct-operated N C G 1/8 1,50 mm FKM 0 - 30 bar Brass 0,080 m3/h -
032U5703 EV210B Direct-operated N C G 1/4 1,50 mm EPDM 0 - 30 bar Brass 0,080 m3/h -
032U5704 EV210B Direct-operated N C G 1/8 2,00 mm FKM 0 - 30 bar Brass 0,150 m3/h -
032U5705 EV210B Direct-operated N C G 1/8 3,00 mm EPDM 0 - 30 bar Brass 0,300 m3/h -
032U5706 EV210B Direct-operated N C G 1/8 3,00 mm FKM 0 - 30 bar Brass 0,300 m3/h -
032U5707 EV210B Direct-operated N C G 1/4 2,00 mm EPDM 0 - 30 bar Brass 0,150 m3/h -
032U5708 EV210B Direct-operated N C G 1/4 2,00 mm FKM 0 - 30 bar Brass 0,150 m3/h -
032U5709 EV210B Direct-operated N C G 1/4 3,00 mm EPDM 0 - 30 bar Brass 0,300 m3/h -
032U5710 EV210B Direct-operated N C G 1/4 3,00 mm FKM 0 - 30 bar Brass 0,300 m3/h -
032U5714 EV210B Direct-operated N C G 1/8 2,00 mm EPDM 0 - 30 bar Brass 0,150 m3/h -
032U5801 EV210B Direct-operated N C G 1/4 1,50 mm NBR 0 - 30 bar Stainless steel 0,080 m3/h -
032U5805 EV210B Direct-operated N C G 3/8 3,00 mm NBR 0 - 10 bar Stainless steel 0,300 m3/h -
032U6501 EV210B Direct-operated N C NPT 1/8 1,50 mm FKM 0 - 20 bar Brass 0,080 m3/h -
032U6502 EV210B Direct-operated N C NPT 1/4 1,50 mm FKM 0 - 20 bar Brass 0,080 m3/h -
032U6505 EV210B Direct-operated N C NPT 1/4 3,00 mm FKM 0 - 20 bar Brass 0,300 m3/h -
032U6506 EV210B Direct-operated N C NPT 3/8 3,00 mm FKM 0 - 20 bar Brass 0,300 m3/h -
 

 

Spare parts kits for EV210B

 

 

 

 

 

 

 

Spare parts kits for EV210B
Code number Type
032U1060 Spare part kit EV210B 1.5-3 NBR
032U2003 Spare part kit EV210B 1.5/2/3/4.5 FKM
032U2004 Spare part kit EV210B NO FKM
032U2005 Spare part kit EV210B NO EPDM
032U2006 Spare part kit EV210B NC 6-8-10 EPDM
032U2011 Spare part kit EV210B NC 6-8-10 FKM
032U2012 Spare part kit EV210B NC 15 FKM
032U2013 Spare part kit EV210B NC 15 EPDM
032U2014 Spare part kit EV210B NC 20 FKM
032U2017 Spare part kit EV210B NC 20 EPDM
032U2018 Spare part kit EV210B NC 25 FKM
032U2019 Spare part kit EV210B NC 25 EPDM
032U3201 Spare part kit EV210B 15 NBR
032U3202 Spare part kit EV210B 20 NBR
032U3204 Spare part kit EV210B 6 NBR
032U3205 Spare part kit EV210B 10 NBR
032U6000 Spare part kit EV210B 1.5-3 EPDM

Buy-Online

 
icon label

Buy Solenoid Valves Online through our Buy-Online website: